Description
Billet S400 oil drain flange to -12an / Jic 37 degree taper
100% USA AMERICAN MADE with USA 6061 aluminum.
Massive 1" inside diameter for 3/8 in length to drain oil FAST.
ALL Borg Warner journal bearing turbos require a -12 or 3/4" drain. If you are using less than this, it can cause oil to leak past seals.
2" center to center of bolt holes.
Bolt hole diameter is .406" to easily fit 8mm, 5/16, 3/8, or 10mm bolts.
Will also fit GT42 and larger garrett turbos with a little trimming of the edges.
Will Fit Holset HC5A, HX80, HX82, HX83 if you ream bolt holes to 7/16"
100% USA AMERICAN MADE with USA 6061 aluminum.
Massive 1" inside diameter for 3/8 in length to drain oil FAST.
ALL Borg Warner journal bearing turbos require a -12 or 3/4" drain. If you are using less than this, it can cause oil to leak past seals.
2" center to center of bolt holes.
Bolt hole diameter is .406" to easily fit 8mm, 5/16, 3/8, or 10mm bolts.
Will also fit GT42 and larger garrett turbos with a little trimming of the edges.
Will Fit Holset HC5A, HX80, HX82, HX83 if you ream bolt holes to 7/16"